Bachmann
Home Up Speed Matching Athearn Atlas Bachmann BLI Genesis Kato PCM Proto Rivarossi Stewart Sunset Walthers

 

Bachmann 2-8-0

HO Scale

Click here for info on installing a DZ-121 inside the firebox of a Bachmann 2-8-0.

Soundtraxx Tsunami in 2-8-8-2.

Digitrax DN144K installed in a 44 tonner, motors wired in series.

ho_44tonner_1.jpg (26874 bytes)

Digitrax DZ-121 installed in a 44 tonner, motor wired in series.

ho_44ton_2.jpg (23200 bytes)

Lenz LE103XF installed in a H16-44.

ho_h16-44_1.jpg (29124 bytes)

Digitrax DZ121 installed in 4-8-2, I removed the four pin connector between the loco and tender but kept the two pin connector for power pickup.  I reused the two internal two pin connectors, one to bring track power from the square PCB to the decoder (on left in pic), the other to run from the decoder to the firebox light (on right in pic).  I moved the wires from the firebox light to the pads of the removed four pin connector and a couple of jumper wires to connect the track power to the other connector. 

ho_2-8-2_1.jpg (31085 bytes)

ho_2-8-2_2.jpg (19259 bytes)

Soundtraxx DSX installed in the tender of Bachmann GS4 4-8-4.

HO_4-8-4_3.jpg (47905 bytes)

Also with Digitraxx DZ-143 in the loco with firebox flicker LEDs and headlight and Gyralight.

wpe6.jpg (7273 bytes)

wpe4.jpg (19012 bytes)

On30

Climax

Soundtraxx TSU-0750 light logging with 27mm high bass speaker, factory PCB removed.

TCS M1 in 0-6-0.  Decoder fit up into the smoke box.